新型旋切式气液两相喷嘴及内部流场数值模拟

本文在对各种气动性喷嘴及其雾化机理分析的基础上提出一种新型雾化喷嘴--旋切式气液两相喷嘴。该喷嘴具有结构简单、喷雾量无限可调、喷雾锥角调整灵活、防堵塞、雾化效果好的优点。通过CFD数值模拟研究发现,在旋切式喷嘴内部液流已经被气流剪切雾化成细小颗粒,其均匀的分散在气流中,在混合室内部形成气液混合流,形成一次雾化。当气液混合流脉冲喷出孔喷时,体积进一步膨胀,同时,高速液滴外部空气相互作用,产生二次雾化,促进了雾化效果。     

气泡雾化细水雾灭火技术应用前景分析

介绍了气泡雾化灭火技术,同时结合前人理论和试验研究,分析了气泡雾化细水雾灭火技术的优势,并从固定式和移动式两个方面分析了气泡雾化细水雾灭火技术的应用前景.     

改善热轧降尘效率的雾化参数分析*

为提高热轧工作区的雾化降尘效率,研究尘雾颗粒碰撞相关理论,以热轧产生的氧化铁皮粉尘为研究对象,建立基于雾滴粒径、雾滴速度和液体流量多个雾化参数的降尘效率计算模型;分析单一雾化参数对降尘效率的影响;通过实验,测得不同气液压力组合下的雾化参数,运用响应曲面法,分析多个雾化参数耦合对降尘效率的影响。结果表明:降尘效率随着雾滴粒径的减小、液体流量增大而提高,雾滴速度对其影响不明显;多因素耦合时,通过调节气液压力组合来控制降尘效率,结合高温环境对雾滴存活时间的影响分析,当气压0.3 MPa、液压0.5 MPa时,粒径为21～27 μm的粉尘沉降效果最佳,降尘效率达到90%以上,可有效解决热轧车间粉尘污染问题。     

微乳化柴油雾化及燃爆特性实验研究

采用马尔文Spraytec型激光粒度仪和液体燃料爆炸性能评定装置,分别测定微乳化柴油在不同喷雾压力下的雾化特性和燃爆特性,采用液体燃料持续燃烧性能测定装置测定微乳化柴油在无约束条件下的燃烧特性,并与-10号军柴进行对比评估。结果表明,随着喷雾压力的升高,微乳化柴油的雾化粒径逐渐减小,最大爆炸压力呈上升趋势;相同喷雾条件下,微乳化柴油相比-10号军柴雾化性能和爆炸猛烈程度均有所下降;无约束条件下微乳化柴油相比-10号军柴持续燃烧时间有所减少。在一定程度上,微乳化柴油的防火防爆安全性优于-10号军柴。     

基于可拓联系云模型的隧道塌方风险等级评价方法

为准确预测隧道塌方风险等级，基于塌方相关理论和工程实际，建立塌方风险等级评价因子体系，借助云理论中云雾化现象检验采用综合权重方法确定的评价因子权重，利用物元可拓理论与联系云模型实现评价因子定性与定量之间的转换，提出1种基于可拓联系云的隧道塌方风险等级评价方法。计算待评价物元与联系云模型间的综合确定度，结合模糊等级特征值确定塌方风险等级，并引入距离相似性判断风险的演变趋势。研究结果表明:可拓联系云模型评价结果与实际塌方风险等级一致，模型可以较好地适用于隧道塌方风险等级评价。     

液体气溶胶抑制受限空间内烃类挥发的实验研究

在含有残留油品的受限空间内作业时,易发生油气燃爆事故。利用两性离子型氟碳表面活性剂组分制备了具有低表面张力的抑爆剂溶液,能够在易挥发烃类液体表面自由铺展成液膜,从而对烃类液体形成液封,抑制油气挥发。利用超细雾化装置,能够将抑爆剂溶液雾化形成液体气溶胶,气力输送至受限空间内。实验验证了受限空间内液体气溶胶中的微小液滴能够沉积在残留油品的表面形成液封,同时液滴和液膜的气液界面能够吸收空间内的油气分子,从而降低空间内的油气浓度。研究证明,利用抑爆剂液体气溶胶混合物来置换含残留油品受限空间内的油气,能够将受限空间内的油气浓度长久维持在10%LEL(Lower Explosion Limit)以下,降低空间内油气燃爆风险。     

超声干雾抑尘机理及其技术参数优化研究

为改善超声波雾化效果,提高超声干雾的除尘效率,根据空气动力学、"云"物理学和斯蒂芬流输运原理,研究超声干雾抑尘机理。采用自行设计的雾流参数测定试验装置,研究压缩空气的压力(气压)、水流量等指标对超声雾化器雾化效果的影响,得出超声雾化器合理的供气压力和供水流量。选取烧结磁铁矿粉尘为呼吸性粉尘样品,在超声雾化器最佳运行条件下对其除尘效率进行测定。研究结果表明:微细水雾有利于呼吸性粉尘的捕集。超声雾化器的最佳运行条件为:气压0.35 MPa,水流量30 L/h。在此运行条件下,其对呼吸性粉尘的平均除尘效率为98.3%,最高可达98.6%。     

Spray atomization characteristics as a function of pesticide formulations and atomizer design

Abstract

The use of formulation adjuvants to increase the drop size of pesticide sprays has followed a practice which has evolved through many years of experimentation and development. The earliest materials used were simply designed to make the spray mix viscous on the premise that a mayonnaise‐like fluid would produce larger drops and hence increase the deposit efficiency. These viscomer materials, emulsions and water soluble thickeners such as starch and agars, as well as more complex cellulose materials, produced thick non‐Newtonian fluids which were difficult to mix, pump and spray, and provided questionable results. First, the larger drops reduced target coverage from a given volume of spray; and second, field tests with these definitely showed that a large volume of small drops were still being produced even with the thickest of formulations.

The next step in adjuvant evolution was the introduction of polyvinyl, polyacrylamide and polyamide elastomer materials. These polymers are also non‐Newtonian, but due to their peculiar molecular bonding, they have the capability of forming long string‐like streams which when atomized can retract into a spray of large drops. Pure forms of these polymers are blended by commercial producers to enable compatibility with pesticide chemicals. We have conducted a series of laboratory and wind tunnel tests; first, to try and establish some physical parameters identifying their characteristics and second, to determine how these adjuvants affect atomization and the production of small drift‐prone drops (i.e., those smaller than 120 μm in diameter).

Our results with the laboratory studies of physical properties and of the wind tunnel drop size tests have been inconclusive. The elastomer materials have relatively low viscosity (1.5 to 6 mPa.s) and reduced surface tension (50 to 60 mN/m) but our stream‐flow extension tests were non‐productive. The drop size studies comparing water sprays with polymer‐water mixtures gave us a mixed picture. Generally drop size was increased for all of the fan (deflector and milled orifice) and cone type atomizers. But an increase was also indicated of the volume of spray in drops less than 120 μm showing that the polymer did not fully control the production of these small drops under all of the testing procedures we studied.

It is difficult to evaluate the capability of these additives for controlling or reducing production of the drift‐prone small drops. While the pure solutions of the water soluble polymers would appear to be capable of this desirable effect, it is also evident that in order to make these formulations compatible with pesticide spray solutions, several other solvents, emulsifiers and surface active chemicals are added to the formulation, thus affecting the atomization characteristics and hence their drift‐control capability.     

麻石除尘器的技术改造

详细介绍了山西焦化股份有限公司针对锅炉除尘系统运行中存在的问题进行的多项技术改造，改造后其除尘效率得以提高，烟尘排放质量浓度达到国家一级标准。     

现代化农业温室的夏季降温研究及其发展

本文阐述了夏季温室的常用降温方法,并加以简要的比较,提出了超声波雾化加湿在夏季农业温室降温中的应用和其控制方法,预测今后农业温室降温的发展趋势。